It is not enough to simply buy an appliance and leave it in the box. Proper dryer hookup and installation are necessary. And it is best to do everything correctly before the first startup. True Tech Appliance Repair provides professional dryer installation throughout Denver, Colorado.
Our professionals handle gas line hookup, power cord and outlet inspection, and vent hose connection. The technician also levels the unit and performs a test run before leaving. The service is usually available on the same day you contact us. This applies to both gas and electric models. We work with appliances from many brands, including Whirlpool, LG, Samsung, GE, Maytag, Electrolux, Speed Queen, Kenmore, Amana, Bosch, Miele, and others.
Present this offer to your technician to receive a labor discount.
( * Excludes diagnostics. Cannot be combined with other offers)
Quality installation of major home appliances is the key to long and safe operation. Dryer hookup installation follows clearly defined steps that depend on the type of power supply used by the appliance. The layout of the room and the manufacturer’s requirements also matter.
Trying to install the appliance on your own often leads to breakdowns or improper operation. The specialists at True Tech perform the full scope of work. This guarantees the best result.
Gas dryer hookup must always be performed by a certified technician. That technician has experience working with the appropriate equipment. A special flexible hose is used for the connection. It runs from the dryer’s gas inlet to the shutoff valve located on the wall. The experts at our company fully check the opening and closing of that shutoff valve. They use only fittings that meet the required standards. The system is carefully checked for gas leaks. A special detector is used for this. That makes dryer gas installation completely safe.
Floor and wall gas dryer wall hookup should never be completed without detector testing. Otherwise, there is a risk of gas leaks and serious consequences. Contact True Tech for professional service.
To complete electric dryer hookup and installation, a dedicated 240V, 30A line is required. It is important to use the correct power cord configuration. Otherwise, dryer installation for an electric model will not be possible.
Most new models are sold without a cord. The purchased cord must match the outlet already installed in your laundry area. When the True Tech professionals arrive, they inspect the outlet type and the electrical specifications so the proper cord can be selected.
At the final stage, the dryer is leveled. Dryer duct installation is also completed. We always run a full cycle to verify proper operation of the appliance and the correctness of the hookup.
Homes in Denver, Colorado, built before 2000 often have 3 prong outlets, including those for dryers. Modern models require 4 prong cords. As a result, they are not directly compatible. In that case, dryer hookup installation requires replacing the cord or replacing the outlet. Our pros can handle either of these tasks.
If necessary, we install the correct 3 prong cord to match the existing outlet. We can also upgrade the outlet by installing a 4 prong version. Everything depends on your preferences and your readiness to move to the current standard. The dryer installation service includes evaluation of the existing outlet. Our technician performs that inspection upon arrival. After that, the best option is offered before any work begins.
Dryer exhaust installation and connection of the proper vent hose are also part of our technicians’ work. As a reliable service company, we use rigid or semi rigid metal ducts. With them, we connect the dryer exhaust outlet to the existing wall vent opening. We do not use flexible foil ducts. They trap lint at every bend. Situations like that are a common cause of vent fires, especially when dryers are in regular use.
The vent hose we install is securely fastened at both ends. In addition, our technician checks that the exterior vent flap opens freely. We also test the connection for tightness before the appliance test run.
Clothes dryer vent installation is performed only to an existing wall vent opening. Our technicians do not cut new ventilation openings and do not install new ductwork through walls. For that type of work, a separate contractor is required.
Dryer and washer installation can be completed in one visit. Usually, the dryer is placed on top of the washer and secured with a special stacking kit. That kit is selected for the exact appliance models. As a reliable repair company, we do not use universal kits. They do not provide sufficient stability, especially during high speed spin cycles. We always check that the correct kit is available before the visit.
The specialists at True Tech Appliance Repair perform stacked installation even when gas dryer hookup is required. We carefully complete and check the electrical and gas connections. We route the vent hose and test the appliances before leaving.
All planned dryer installation work is always followed by inspection using a strict checklist:
Sometimes the dryer may run but produce no heat. In many cases, this is caused by a closed gas shutoff valve or an incorrect cord configuration. Mechanical defects on brand new models are highly unlikely.
I ordered gas dryer hookup. The technician arrived on time and was nearby. He checked the system for leaks with a special detector and quickly set everything up. I was very pleased that they ran a heating test cycle before leaving. Good service, I recommend it.
I bought a dryer, but the outlet in the laundry room turned out to be old and only had 3 prongs. The technician arrived the same day. He selected and installed the proper 4 prong cord himself, leveled the machine, and securely connected the vent. Fast, professional, and without any unnecessary hassle. Most importantly, everything was according to the price list, with no hidden extra charges.
The team installed the dryer in a stacked setup on top of the washer. I was worried about stability during the spin cycle. But they used the correct stacking kit. Everything stands firmly and works quietly. Special thanks for checking the rigid duct for safety. There was even a discount. Probably the best service.
From refrigerators to washing machines, we provide fast and reliable maintenance to keep your household equipment in peak condition.
Don’t wait – schedule your repair today and let us get your home back to normal
Dryer hookup installation by our specialists is usually completed without involving additional trades. The main requirement is that the necessary utility connections are already in place. For example, gas dryer hookup to an existing gas supply line is considered appliance installation. But if there is no gas line at the hookup point or no dedicated 240V electrical line, the required rough utility work must first be completed by the appropriate licensed specialists.
Usually, homes built before 2000 have 3 prong 240V outlets. At the same time, modern dryer models use 4 prong plugs. But this is not a problem. Our technicians can replace the cord or the outlet for safe dryer installation if needed.
Yes, that is included in the price. Regardless of the dryer type, the service includes connecting the vent hose from the dryer to the existing wall vent outlet. The operation of the outside vent flap is also checked. At the same time, we do not cut new vent openings and do not install new ductwork through walls.
Yes, it is absolutely possible to connect two dryers in one visit if needed. We can also replace an electric model with a gas dryer and vice versa. However, the necessary utility connections must already be available. If something is missing, we will provide a complete list of the work that must be done before the dryer can be installed.
Yes. If the dryer has already been in use and now needs repair, you can contact us for that service. The repair cost and service terms can be found in the corresponding section of the website.
Yes, information about that can be found in the section dedicated to washers. When ordering combined dryer and washer installation, both appliances will be connected in one visit.
