The specialists at True Tech take a comprehensive approach to their work. Our pros move appliances, connect new equipment, and fix leaks in units that are already in use. And all of this can be handled in a single service call. In addition, a True Tech Appliance Repair technician performs water line installation for refrigerator units. We work throughout Denver, Colorado, as well as the surrounding suburbs.
Our service company consists of certified and insured professionals. As experts, they use only quality fittings and always check every connection for leaks before leaving the job site. In most cases, we provide service on the same day you contact us.
The technicians at True Tech work with models from different brands, including LG, Samsung, Whirlpool, GE, Frigidaire, KitchenAid, Sub Zero, Thermador, Viking, and more, including premium lines.
Present this offer to your technician to receive a labor discount.
( * Excludes diagnostics. Cannot be combined with other offers)
Our specialists perform water line refrigerator installation and some related services. To confirm the details, please contact our manager. This helps us assess the scope of work, calculate the price, and schedule service today.
Water line installation for refrigerator units for new appliances includes connecting the refrigerator to an existing water supply system. A dedicated tube is run from the home’s cold water plumbing line. On the appliance, it is usually connected at the rear panel. In addition, our technician installs a shut off valve. It is needed to stop the water supply for future service.
Usually, the connection point for water line refrigerator installation is an existing cold water pipe under the sink or in the basement. The professionals at True Tech install the supply line and the shut off valve at the source. After that, we connect the tubing to the corresponding valve on the refrigerator. We always check that the system is working properly, including under pressure. Only after that do we complete the job.
Connecting a new refrigerator to water usually takes about an hour, as long as a standard connection is used. If the water source is in a hard to reach location or a long line has to be run, the installation may take longer. A specialist will explain all details after inspecting the work area.
Very often, customers contact True Tech to fix a leak in the supply line, especially if the previous water line installation for refrigerator units was done unprofessionally. As a professional service, we are ready to handle this type of work. We quickly find and fix the cause of the problem.
Most often, the leak appears at the connection point. The cause is often a loose compression fitting or compression nut. There is also a chance that the plastic tube has cracked. Over time, it becomes brittle. Our technician will find the exact cause and fix it.
Sometimes the leak appears behind the refrigerator itself. This is often related to a failed seal where the line connects to the water inlet channel. There is also a chance that part of the tubing has been damaged. This often happens when the refrigerator is moved without first shutting off the water supply.
Our technician finds the exact source of the leak. If needed, they replace the damaged section of tubing. If the damage is serious, full replacement of the line is possible. After that, the system is always tested under pressure. We usually respond to requests quickly. That means refrigerator water line installation or repair can often be completed on the same day you contact us.
Proper water line refrigerator installation is possible only when the correct tubing is selected. Depending on the home layout and the connection point, the True Tech Appliance Repair technicians use one of three options:
At new properties, we usually use braided stainless steel. We also use copper tubing. In that case, water line installation for refrigerator units is as durable as possible.
If you have an older system with plastic tubing and leaks have become a regular problem, replacement is the better option. The True Tech repair company will offer a modern and long term solution for different refrigerator models.
Every refrigerator ice maker water line installation must include a shut off valve. It is installed at the point where the line connects to the plumbing. This makes it possible to quickly turn off the water if a leak is discovered. At the same time, the rest of the home continues to have normal water service.
Older systems often used saddle valves. These pierce the pipe instead of using a proper tee fitting. Over time, those valves clog and eventually lead to leaks. When we are called out in situations like that, our specialists replace those valves with modern ball valves.
Sometimes, after a new refrigerator is installed, the water dispenser may not work. Often, this happens because the water line was connected incorrectly or not fully. Another possible reason is that the shut off valve was not opened completely. Sometimes the issue is that the refrigerator water filter needs to be filled. After installation is completed, the dispenser button should be held down for 3 to 4 minutes. This makes it possible to remove air from the system and fill the filter. If that does not happen, the system should be checked again.
If water still does not flow after priming the system, the specialists recheck the shut off valve, especially whether it is fully open. The tubing is also checked again. It is important to make sure it is not kinked, especially behind the refrigerator.
On some models, for example Samsung and LG French Door units, the water supply line passes through the freezer door. In that case, no water coming from the dispenser may be caused by freezing inside the door. Diagnosing that kind of problem requires a separate approach.
Refrigerator ice maker water line installation is usually done using the same basic approach as a dispenser line. Both systems take water from a single line through the internal inlet valve. Older models that do not have a built in ice maker can sometimes be retrofitted with one. However, in that case, a separate water supply line has to be installed for it to work. Unlike a general handyman, our specialists can complete this type of work, and in many cases, in just one visit.
Quality service. I noticed a puddle behind the refrigerator, and the technician arrived the same day. It turned out the old plastic tube had cracked. The guy quickly replaced it with a reliable braided steel line and installed a proper valve. He checked everything for leaks. I recommend them.
We bought a new refrigerator with an ice maker and needed to connect it to water. The technician arrived quickly and was nearby. He carefully ran the line from the basement and set everything up in less than an hour. The dispenser works perfectly, there were no hidden extra charges, and the price was exactly what we discussed. Thank you for the work.
Real pros. At first, I tried to fix a leak by the wall myself, but I only damaged the fitting. I called these guys, they arrived with their own parts, replaced the worn section of line, and installed a quality ball valve. Fast, clear, and exactly to the point.
From refrigerators to washing machines, we provide fast and reliable maintenance to keep your household equipment in peak condition.
Don’t wait – schedule your repair today and let us get your home back to normal
In most cases, no. Usually, water line installation for refrigerator units involves connecting the appliance to an existing cold water supply. A standard compression fitting is used for this. In essence, this is appliance installation work rather than full plumbing work. But there can be exceptions. For example, if there is no water source anywhere near the refrigerator and a new plumbing line has to be run, that kind of job is usually performed by a licensed plumber. We clarify these details during the call and provide the appropriate recommendations if needed.
You should immediately shut off the valve. This will stop the water supply to the appliance. That way, you can stop the leak. If there is no shut off valve or you cannot reach it, turn off the main water shut off for the home. After that, contact us for repair service. You can review the price list and submit a request on the website. You can also get professional help by calling the listed phone number.
We select the best type for the specific job. Usually, these are braided stainless steel hoses. We also often use copper tubing. We do not use plastic tubing, especially when connecting new appliances. Even when we are dealing with repair of an older leaking supply line, we usually recommend a full replacement with new tubing made of quality materials.
Water line refrigerator installation with a standard connection method usually takes up to one hour. Installation that requires drilling additional openings, running a long new line, or other extra work may take two hours or more. The exact timing and scope of work can be confirmed by calling our manager. They can also tell you the refrigerator water line installation cost.
Moving the appliance, especially without first shutting off the water, is a common cause of problems. Usually, they are related to damage to the tubing behind the unit. If a leak starts after moving the refrigerator or the dispenser stops working, contact True Tech for qualified help. In most cases, we come out the same day.
Yes, our specialists can also repair the refrigerator itself. The repair price and possible discounts for combined services can be confirmed with the manager. The True Tech Appliance Repair team will perform diagnostics and quickly fix the problem.
