In most cases, our customers contact us not for first time garbage disposal installation, but for replacement of an existing unit. And we are ready to help in that situation, often on the same day you contact us. This is especially important if the old unit is already leaking badly, has stopped spinning, or is no longer showing any signs of operation.
True Tech Appliance Repair provides garbage disposal replacement throughout Denver, Colorado, as well as nearby suburbs. Our specialists handle the full scope of work: removal of the old equipment, proper connection of the newly purchased unit, including connection to the drain system and electrical supply. We always check the tightness of all connections before the technician leaves by running and testing the appliance.
The pros at True Tech work with products from many brands, including InSinkErator, Moen, Waste King, KitchenAid, Whirlpool, Bosch, Kohler, and others.
Present this offer to your technician to receive a labor discount.
( * Excludes diagnostics. Cannot be combined with other offers)
At True Tech Appliance Repair, we take the hassle out of dealing with broken kitchen equipment. A clog, a leak, or complete motor failure — our technician is ready to solve any garbage disposal problem in Denver. If the unit cannot be repaired, that is not a problem either. The specialists at True Tech will replace the garbage disposal in full compliance with all requirements and standards. We value your time, which is why we arrive on time and with everything necessary to complete the work. We guarantee cleanliness, leak free connections, and safe operation immediately after installation is complete.
The garbage disposal installers at True Tech are always ready to help when it is time to replace an old unit. We disconnect it from the drain system and the electrical supply. After that, we remove the mounting assembly installed on the sink flange. Our specialists take every detail into account, including the fact that in older homes in Denver, the flange itself is often damaged by corrosion. In such cases, it usually needs to be replaced as well.
We assess the situation upon arrival, and if additional work is needed, we include it in the order without making you wait for a second service call. Garbage disposal installation is completed during the same visit. Our specialists usually carry the necessary extra parts with them. This makes it possible to complete the replacement without repeat trips or delays while searching for parts.
Not every garbage disposal problem means the unit must be replaced. For example, the appliance may hum but not spin. In such cases, the issue may be a jammed grinding plate. Very often, the problem can be resolved with a small hex key and a reset. Our repair company performs diagnostics and fixes these kinds of problems on the same day you contact us.
Sometimes the unit may not turn on at all. This may be related to the reset button being triggered. We recommend checking such situations carefully, because in some cases you may not need a technician at all.
However, there are situations when garbage disposal replacement is the right solution. One of them is a leak from the bottom, which usually means the internal motor seal has failed. Grinding or scraping noises, especially when they are accompanied by visible damage to the housing, also point to replacement. Units that are more than 10 years old and already have mechanical damage are also usually replaced.
If you are not sure about the current condition of the appliance, contact the specialists at True Tech Appliance Repair. We will inspect the disposal and repair it if possible. And if there are serious problems, we will simply replace the garbage disposal during the same visit.
In most homes in Denver, garbage disposals are plugged into an outlet located under the sink. That outlet is often controlled by a wall switch. However, in some cases, the unit is hardwired directly to a dedicated electrical line. The professionals at True Tech can work with both setups.
If there is no outlet and no direct electrical cable available, you will first need to contact an electrician to prepare the required connections. These details are clarified during the initial call. We confirm the availability of utilities and agree on all details in advance.
New garbage disposal models are usually sold with a plastic knockout plug installed inside the dishwasher drain inlet. This inlet is usually located on the side of the unit. If you have a dishwasher, that plug must be removed before the work is completed.
This is a small step that homeowners often forget when trying to connect the unit on their own. And it often leads to dishwasher drainage problems. The technicians at True Tech Appliance Repair check the dishwasher connection during every disposal installation when a dishwasher drain connection is part of the setup.
The cost of garbage disposal installation or replacement is determined individually. The final price depends on several factors. First of all, it depends on whether the old unit needs to be removed. In some cases, the sink flange also needs to be replaced. The availability of ready to use connections is also taken into account, including drain, plumbing, and electrical supply.
The cost to replace garbage disposal work is confirmed before the job begins. For a more detailed consultation, you can contact our manager. Where the appliance was purchased does not matter.
We provide quality service and always carefully inspect every detail. Before the technician leaves, a full diagnostic check is performed. Cold water is turned on and the disposal is started. This makes it possible to confirm that the garbage disposal replacement was completed correctly. We check for leaks at the mounting point, at the drain connection, and at the dishwasher drain inlet. The reset button is tested. We also separately verify proper switch operation. In addition, we carefully inspect the mounting ring area to make sure the sink flange is sealed properly. Our specialists do not leave the job site until the full operation check is complete.
Yesterday the disposal started leaking from the bottom right onto the kitchen cabinet. I called the technicians. They arrived in a couple of hours. They quickly removed the old InSinkErator, replaced the rusty sink flange, and installed a new model. No leaks, and everything works quietly. Best service.
The old disposal hummed but would not spin. The technician arrived quickly and was nearby. He immediately told me honestly that the motor was done for good, it was about 12 years old. They quickly bought a new disposal. He connected everything to the dishwasher and checked it. I am very happy with the quality. There was also a discount.
I liked that I did not have to look for a separate plumber and electrician. In one visit, the technician removed the old unit, redid the wiring under the sink, and carefully installed the new disposal. Fast, professional, and at the price quoted in advance according to the price list.
From refrigerators to washing machines, we provide fast and reliable maintenance to keep your household equipment in peak condition.
Don’t wait – schedule your repair today and let us get your home back to normal
Replacement only. In this kind of situation, the leak is caused by wear of the internal motor seal. Even if you try to replace it, the repair cost will be very high, and that expense will not be justified. In such cases, we immediately explain that continued use of the appliance is not possible and that replacement is the better option.
The cost is calculated individually for each specific case. Many factors are taken into account, including whether the sink flange needs to be replaced and the availability and condition of the utility connections. The final amount depends on the scope of work and is always approved before the job begins. We never publish exact prices on the website because every home has its own specifics. You can order the service online or by calling the listed number.
You purchase the disposal yourself at any store that is convenient for you. We install different models regardless of where they were purchased. When placing the order, tell us the model so we can check compatibility with your sink flange.
Yes, if needed, our technicians can take the removed unit with them. However, it is better to discuss these details with the manager in advance to avoid any misunderstanding.
If the necessary utility connections are already available, garbage disposal replacement usually takes from 30 to 60 minutes. The cost and timing of the work are best confirmed in advance, before our technician arrives.
Yes, the specialists at True Tech Appliance Repair can perform garbage disposal repair. However, diagnostics will first be completed to determine the nature of the problem. Sometimes the issue is so serious that repair no longer makes sense. You can learn more in the corresponding section of the website.
